Elecom Network & Wireless Cards Driver Download

12/14/2021by admin

Please select a model and download HotspotOS.
You have to match the exact AP / WiFi router version to prevent issues.

Please reset the AP / WiFi router to factory settings to avoid problems with some previous configuration.

  • Download 23 Elecom Network Router PDF manuals. User manuals, Elecom Network router Operating guides and Service manuals.
  • The collection of addresses in the network is called the address space of the network. Examples of telecommunications networks include computer networks, the Internet, the public switched telephone network (PSTN), the global Telex network, the aeronautical ACARS network, and the wireless radio networks of cell phone telecommunication providers.
  • Enabling the wireless card allows systems to read chipset information and manufacturer name, as well as connect to a network without using an Ethernet cable.

Connect your computer to Elecom router web interface.
Go to the Firmware upgrade section.

IMPORTANT

Network core may be no go zone for Chinese vendors. Another idea under consideration is a limit on Chinese equipment in telecom networks, said. 18 Dec, 2020, 07.52 AM IST.

Be sure and untick Keep settings option before HotspotOS installation.

Elecom Network & Wireless Cards Driver Download
Navigate to the location where the HotspotOS for your model is downloaded and press Open.
Press Elecom huge software downloadthe Firmware Update button.
Click Upload to complete the HotspotOS installation.

The HotspotOS installation procedure can take a few minutes.

During this process, you will see information about the processing.

Do not power off the router during the HotspotOS installation, as it can cause the device to crash or become unusable.

Reconnect LAN cable or Disable/Enable NIC card in order to get new valid IP address in 10.200.0.x range from router.

Start your browser and in URL field type https://10.200.0.1:8089/ to login to HotspotOS.

Username: admin
Password: admin

Press the Login button to access to Status tab.

On the HotSpotOS Status page, you can check AP MAC address, Public IP, device Uptime, Radius and Cloud status, and a number of users connected to AP.

The MAC address of your AP will be used in the SignUp process.

During SignUp, after typing HotSpot name, select as HotSpot model HotspotOS, and add your MAC address from the Status tab.

From the Setup page configure your AP.

The Hotspot is started and the Autostart and Inactivity Logout options are active by default.

Inactivity Logout is set to 900 sec. Inactivity period defines how long will the device stay logged-in without activity. This prevents repeated logins if connection temporarily breaks.

Elecom Network Settings

https redirect defines if https websites will be redirected to the splash page. Default and recommended is disabled, to prevent https browser certificate errors.

Elecom Huge Software Download

DNS Web Filtering – disabled
DNS Web Filter IP – 13.92.228.228
Auto Update – enabled

By default as Network WAN Connection is set DHCP, but you can choose network protocol based on your needs. Our recommendation is to use DHCP Network Protocol.

WiFi channels – Eleven channels are designated in the 2 GHz range, spaced 5 MHz apart from each other. Those eleven channels in the spectrum are allowed anywhere in the world.

DNS – Custom
IP – 10.200.0.1

Please note, if the DNS IP address isn’t 10.200.0.1 the whitelist will have no effect.

Save changes.

From the SSID tab, you can Enable SSID 1 and 2.
Configure the SSID name and enable it.
Secondary SSID 2 is mostly used for staff WiFi with WPA2 password but you can also enable Hotspot on it.


If you want to use Social network login feature or Paypal as payment gateway, enable it on the Whitelist tab and Save changes.

You can also whitelist websites based on URL, IP, or MAC.

From the System tab, you can flash HotspotOS image and change Admin password.

When you finish setup, restart the AP / WiFi router to apply changes.

Elecom HotspotOS Download

Driver

ELECOM WRC-1750GHBK2-I/C

Download HotspotOS

1. Boot WRC-1750GHBK2-I/C normaly
2. Access to “https://192.168.2.1/” and open firmware upgrade page (“ファームウェア更新 手動更新(アップデート)”)
3. Select the HotspotOS image and click apply (“適用”) button to perform firmware update
4. On the (initramfs) factory image, perform sysupgrade with squashfs-sysupgrade image
5. Wait ~150 seconds to complete flashing

ELECOM WRC-300GHBK2-I/C

Download HotspotOS

1. Boot the WRC-300GHBK2-I normaly and connect the computer to its LAN port
2. Access to “https://192.168.2.1/” and open firmware update page (“ファームウェア更新 手動更新(アップデート)”)
3. Select the HotspotOS image and click apply (“適用”) button to perform firmware update
4. On the (initramfs) factory image, execute “mtd erase firmware” to erase stock firmware and execute sysupgrade with squashfs-sysupgrade image for WRC-300GHBK2-I
5. Wait ~150 seconds to complete flashing

ELECOM WRC-1167GHBK2-S

Download HotspotOS

1. Rename the factory image to “wrc-1167ghbk2-s_v0.00.bin”
2. Connect the computer to the LAN port of WRC-1167GHBK2-S
3. Connect power cable to WRC-1167GHBK2-S and turn on it
4. Access to “https://192.168.2.1/details.html” and open firmware update page (“手動更新(アップデート)”)
5. Select the factory image and click apply (“適用”) button
6. Wait ~150 seconds to complete flashing

ELECOM WRC-1900GST

Download HotspotOS

1. Connect the computer to the LAN port of WRC-1900GST
2. Connect power cable to WRC-1900GST and turn on it
3. Access to “https://192.168.2.1/” and open firmware update page (“ファームウェア更新”)
4. Select the HotspotOS image and click apply (“適用”) button
5. Wait ~150 seconds to complete flashing

ELECOM WRC-2533GST

Download HotspotOS

Flash instruction using factory image:

1. Connect the computer to the LAN port of WRC-2533GST
2. Connect power cable to WRC-2533GST and turn on it
3. Access to “https://192.168.2.1/” and open firmware update page (“ファームウェア更新”)
4. Select the HotspotOS image and click apply (“適用”) button
5. Wait ~150 seconds to complete flashing

If you need help with configuration, please go to starthotspot.com and contact our tech support. We’ll be glad to help you.

Was this article helpful?

What's new

See the release notes and the readme.txt file for installation instructions, supported hardware, what's new, bug fixes, and known issues.

Overview

This download installs base drivers, Intel® PROSet for Windows* Device Manager, and Intel® PROSet Adapter Configuration Utility for Intel® Network Adapters with Windows® 10.

Which file should you download?

Note:10-GbE adapters (those that support Windows 10) are only supported by 64-bit drivers.

  • PROWin32.zipfor 32-bit (x86) editions of Windows*
  • PROWinx64.zipfor 64-bit (x64) editions of Windows

How to use this download

Elecom Network Speed Test

Download the self-extracting archive and run it. It will extract the files to a temporary directory, run the installation wizard, and remove the temporary files when the installation is complete. All language files are embedded in this archive. You don't need to download an extra language pack.

Elecom Network & Wireless Cards Driver Downloads

Supported devices

This software may also apply to Intel® Ethernet Controllers. Support for built-in network connections is provided by the system or board manufacturer.

About Intel® drivers

The driver or software for your Intel® component might have been changed or replaced by the computer manufacturer. We recommend you work with your computer manufacturer before installing our driver so you don’t lose features or customizations.

Elecom Network Provider

See a list of manufacturers’ Support websites.

Comments are closed.