Drivers Draytek Usb Devices Usb
Vendor: Product: Chip: USB Vendor: USB Product: MaxPower: 2Wire: 802.11g USB (v1) ISL3886: 0x1630: 0x0005: 3COM: 3CRWE254G72: ISL3886: 0x0506: 0x0a11: Accton: 802.11g.
This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.
Original product version: Windows 10, version 1703
Original KB number: 4021854
When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.
This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.
This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.
To fix this issue, use one of the following methods.
To resolve this issue, install update 4022716.
If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.
If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
See the device manufacturer's user guide for specific instructions about how to install the driver.
If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:
- Install the device-specific driver (see Method 2).
- Open Device Manager.
- Right-click (or tap and hold) the name of the device, and then select Uninstall.
- Restart the computer.
When it restarts, Windows will try to reinstall the device by using the device-specific driver.
Category: Network and Modem
Manufacturer: DrayTek Corp.
Caution Level: Safe
Download File Size: 4.8 MB
Operating System: Windows 2000, Windows XP
Latest Version / Release Date: 18.104.22.168 / 2/21/01
What Is A Usb Devices
Windows device driver information for DrayTek miniVigor USB Driver for Windows2000/XP
Drivers Draytek Usb Devices Download
The DrayTek miniVigor USB Driver for Windows2000/XP is used to allow the communication hardware component to be hosted on a variety of computer systems. The communication device requires the presence of a Universal Serial Bus interface port to effectively connect to a host machine. It makes it relatively easier to attain a connection compared to a PCI-based communication device which installs internally into the host machine. The DrayTek miniVigor is also designed to provide a better performance when compared to PCMCIA type devices. The DrayTek miniVigor USB Driver for Windows2000/XP allows for the transmission of data directly from the Universal Serial Bus interface port of the host machine. The data transmission speeds that are supported by the device driver can reach up to 128 kbps but limited to a single user support. Like most communication hardware components this supported device can be used to access both Intranet and Internet network environments.
Unless you update your drivers regularly you may face hardware performance issues.
To check your drivers you should manually verify every device on your system for driver updates
The device driver of this communication hardware component works in conjunction with the LED display lights on the device. This means that whatever status is physically detected by the DrayTek miniVigor be reflected to the host computer system via a software interface. The software interface is made possible by the installation of the manufacturer provided device driver to allow both hardware and software components to effectively communicate. The DrayTek miniVigor USB Driver for Windows2000/XP allows the hardware component to transmit audio, data, and speech packets across network environments. As a communication hardware component the device driver makes it possible for the supported device to implement existing network protocols of the host operating system platform. The Universal Serial Bus interface provided by the device driver allows the communication hardware to conform with older communication port standards. The DrayTek miniVigor USB Driver for Windows2000/XP allows for the implementation of different B Channel Protocols. It is highly recommended you run a free registry scan for Windows and DrayTek miniVigor USB Driver for Windows2000/XP errors before installing any driver updates.